Rotary cut tire crusher Introduction

Rotary cut tire crusher working principle shown in Figure 1, when the tooth surface with a biaxial (arbor) is rotated due to the compression and splitting the role between the material and the roll axis, the material was taken and roller the gap relative rotation between the cylindrical roller is broken, crushed material is discharged under the action of gravity and turn roll. This structure of the tire crusher is suitable for crushing bulky waste. Crushing process is continuous, mandatory discharge effect, so easy to produce clogging.
The paper should be coordinated tire crusher, in order to improve the efficiency of the transmission cancel gearbox, hydraulic motor directly connected with the arbor. Requirements can automatically adjust the output torque and speed based on material properties, to ensure continuous crushing capacity and to avoid motor overload burned.
Tire crusher hydraulic drive requirements: (1) Application of hydraulic motor driving biaxial tire crusher; (2) to work properly, the output speed 40r / min, the output torque 10000N · m; (3) When the load increases the output torque of 20000N · m, the system automatically reverse and then forward; (4) constant power control, can automatically reduce the speed increase torque; (5) safe, reliable, low noise.